Toyota Tacoma manuals

Toyota Tacoma 2015-2018 Service Manual: Vane Pump(for 2tr-fe)

Installation
INSTALLATION PROCEDURE 1. INSTALL VANE PUMP ASSEMBLY (a) Install the vane pump assembly with the 2 bolts. Torque: 21 N·m {214 kgf·cm, 15 ft·lbf} (b) Connect the ground wire with the bolt. T ...

Components
COMPONENTS ILLUSTRATION ILLUSTRATION ...

Other materials:

Dtc Check / Clear
DTC CHECK / CLEAR 1. CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the back sonar or clearance sonar switch assembly on. (d) Turn the Techstream on. (e) Enter the following menus: Body Electrical / Intuitive P/A / Trouble Codes. (f) Check for D ...

On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT RADIATOR CAP SUB-ASSEMBLY CAUTION: Do not remove the radiator cap sub-assembly while the engine and radiator assembly are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns. (a) Measure the valve opening pr ...

System Voltage Circuit Short to Ground or Open (P056014)
DESCRIPTION The battery supplies power to the ECM even when the ignition switch is off. This power allows the ECM to store data such as DTC history, freeze frame data and fuel trim values. If the battery voltage falls below a minimum level, the ECM data is cleared and the ECM determines that ...

© 2011-2023 Copyright www.ttguide.net