Identification Information
PrecautionReassembly
REASSEMBLY
PROCEDURE
1. INSTALL UN-LOCK WARNING SWITCH ASSEMBLY (w/o Smart Key System)
(a) Engage the 2 claws to install the un-lock warning switch assembly to the
upper steering column bracket assembly.
2. INSTALL IGNITION SWITCH LOCK CYLINDER ASSEMBLY (w/o Smart Key System)
(a) T ...
Room Oscillator does not Recognize Key
DESCRIPTION
If code verification cannot be performed in the vehicle interior, there may be
problems with the communication between the vehicle (indoor electrical key antenna
assembly (front floor) or (rear floor)) and electrical key transmitter sub-assembly,
or the certification ECU (smart ke ...
Installation
INSTALLATION
PROCEDURE
1. INSTALL RADIATOR GRILLE
(a) Engage the 10 guides to install the radiator grille.
(b) Install the 2 clips.
(c) Install the 2 screws.
(d) Remove the protective tape.
(e) w/ Toyota Safety Sense P
(1) Engage the clamp.
(2) Connect the connector.
2. ADJUST MILLIMETER W ...