Toyota Tacoma (2015-2018) Service Manual: High Mounted Stop Light Assembly

Installation

INSTALLATION PROCEDURE 1. INSTALL AUTO HIGH BEAM SWITCH (a) Attach the 2 claws to install the auto high beam switch to the instrument panel lower finish panel sub-assembly. 2. INSTALL INSTRUMENT ...

Components

COMPONENTS ILLUSTRATION ILLUSTRATION ...

Other materials:

Propeller Shaft System
Problem Symptoms Table PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Che ...

Inspection
INSPECTION PROCEDURE 1. INSPECT COUNTER GEAR (a) Using a dial indicator and 2 V-blocks, measure the counter gear runout. Maximum runout: 0.03 mm (0.00118 in.) If the runout is more than the maximum, replace the counter gear. HINT: Measure the 3 areas shown in the illust ...

Differential System(w/o Differential Lock)
Precaution PRECAUTION 1. Before disassembly, clean the outside of the front and rear differential assembly and remove any sand and mud to prevent it from entering the assembly during disassembly and installation. 2. When removing connected parts made of a light alloy, such as front and rear ...