Toyota Tacoma 2015-2018 Service Manual: Transmission Control Cable

Torque Converter And Drive Plate

Inspection INSPECTION PROCEDURE 1. INSPECT TORQUE CONVERTER ASSEMBLY (a) Inspect the one-way clutch. (1) Press on the spline of the stator with a finger and rotate the spline. Check that the ...

Components

COMPONENTS ILLUSTRATION ...

Other materials:

Check Bus 5 Line for Short to GND
DESCRIPTION There may be a short circuit between one of the CAN bus lines and GND when there is no resistance between terminal 15 (CA5H) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3, or terminal 16 (CA5L) of the central gateway ECU (network gateway ECU) and ...

Installation
INSTALLATION PROCEDURE 1. INSTALL FRONT BUMPER ASSEMBLY (a) w/ Fog Light: (1) Connect the 2 connectors. (b) Engage the 3 claws and guide to install the front bumper assembly. (c) Remove the protective tape. (d) Install the 6 clips. (e) Engage the clamp. (f) Connect the connector. (g) Insta ...

Rear Leaf Spring
Components COMPONENTS ILLUSTRATION Disassembly DISASSEMBLY PROCEDURE 1. REMOVE BUSH (a) Fix the spring in a vise. (b) Using a hack saw, cut both ends off the bushes. (c) Using SST and a press, press out the 2 bushes. SST: 09950-60010 09951-00350 SST: 09950-70010 ...