Installation
INSTALLATION
PROCEDURE
1. INSTALL POWER STEERING LINK
(a) Insert the power steering link into the vehicle in the order shown in the
illustration.
Install in this Direction ...
Components
COMPONENTS
ILLUSTRATION
*1
NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
*2
OIL PAN COVER SILENCER
*3
NO. 1 OIL PAN PLUG
...
Related Tacoma materials
Steering Angle Sensor Unusual Bank Angle Detected (C1440)
DESCRIPTION
If the skid control ECU (master cylinder solenoid) determines that the vehicle
is being driven at a steep bank angle, the skid control ECU (master cylinder solenoid)
stores DTC C1440 while VSC operation is temporarily disabled. It is not a malfunction
if the system and sensor circ ...
Precaution
PRECAUTION
1. PRECAUTIONS FOR REFRIGERANT HFO-1234yf (R1234yf)
(a) Compatibility
(1) The parts used in the refrigerant cycle, the compressor oil, etc. of the
HFO-1234yf (R1234yf) system are not compatible with the conventional HFC-134a (R134a)
system.
(b) HFO-1234yf (R1234yf) Refrigerant
(1 ...
Installation
INSTALLATION
PROCEDURE
1. INSTALL COOLER CONDENSER ASSEMBLY
(a) Engage the 2 claws to install the 2 condenser upper brackets.
(b) Engage the 2 claws to install the 2 condenser lower brackets.
(c) Lift the cooler condenser assembly up from the rear side of the vehicle,
and install ...