PROBLEM SYMPTOMS TABLE
HINT:
Symptom |
Suspected Area |
See page |
---|---|---|
Even when the mobile wireless charger switch is turned on, the switch indicator light does not illuminate |
Main switch power source circuit |
|
Wireless charger main switch |
|
|
When the mobile wireless charger switch is tuned on, the switch indicator light illuminates but the indicator light (amber) on the mobile wireless charger cradle assembly does not illuminate and a device cannot be charged |
Check that the device being used is a Qi-compliant rechargeable device |
- |
Check if wireless charging is possible using another Qi-compliant rechargeable device |
- |
|
Wireless charger power source circuit |
|
|
Main switch signal circuit |
|
|
Status signal circuit |
|
|
Mobile wireless charger cradle assembly |
|
|
When the mobile wireless charger switch is tuned on, the indicator light (amber) on the mobile wireless charger cradle assembly illuminates but a device cannot be recharged |
Check that the device being used is a Qi-compliant rechargeable device |
- |
Check if wireless charging is possible using another Qi-compliant rechargeable device |
- |
|
Mobile wireless charger cradle assembly |
|
|
Even when the light control switch is turned to the tail or head position, the mobile wireless charger switch does not illuminate |
Main switch illumination circuit |
|
Wireless charger main switch |
|
|
Even when the light control switch is turned to the tail or head position, the indicator lights (green and amber) on the mobile wireless charger cradle assembly do not dim |
Wireless charger illumination circuit |
|
Mobile wireless charger cradle assembly |
|
|
The indicator lights (green and amber) on the mobile wireless charger cradle assembly blink |
If the temperature around the charging area is high, wait until it cools down |
- |
Check that the device being used is a Qi-compliant rechargeable device |
- |
|
Check if wireless charging is possible using another Qi-compliant rechargeable device |
- |
|
Status signal circuit |
|
|
Mobile wireless charger cradle assembly |
|
Amplifier Box Speaker Assembly
Components
COMPONENTS
ILLUSTRATION
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting
the cable from the negative (-) battery terminal. Therefore, make sure to read the
disconnecti ...
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the air conditioning system.
*: Use the Techstream.
PROCEDURE
1.
VEHICLE BROUGHT TO WORKSHOP
NEXT
...
Active traction control system
The active traction control system automatically helps prevent the spinning of
4 wheels when the vehicle is started or accelerated on slippery road surfaces.
■ System operation
Vehicles with an automatic transmission:
Stop the vehicle, shift the shift lever to N and put the frontwheel d ...