Toyota Tacoma manuals

Toyota Tacoma (2015-2018) Service Manual: Problem Symptoms Table

PROBLEM SYMPTOMS TABLE

HINT:

  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Engine Immobiliser System (w/o Smart Key System)

Symptom

Suspected Area

See page

Engine does not start because no initial combustion occurs

Proceed to "Engine does not Start because No Initial Combustion"

Engine does not start but initial combustion occurs

Proceed to "Engine does not Start but Initial Combustion Occurs"

Security indicator light does not blink

Proceed to "Security Indicator Light Does not Blink"

Key Cannot be registered

Proceed to "Key Cannot be Registered"

How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT: Use the following procedure to troubleshoot the engine immobiliser system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP ...

Registration
REGISTRATION PROCEDURE 1. DESCRIPTION OF CODE REGISTRATION (a) w/ Wireless Door Lock Control System: The key has 2 codes: the key code (immobiliser code) and the wireless code. Both of these cod ...

Other materials:

Listening to an iPod
Connecting an iPod enables you to enjoy music from the vehicle speakers. Select “iPod” on the “Select Audio Source” screen. When the iPod connected to the system includes iPod video, the system can only output the sound by selecting the browse screen. Connecting an iPod Audio control s ...

Automatic High Beam Camera (B124C)
DESCRIPTION The main body ECU (multiplex network body ECU) detects a high beam headlight illumination request signal of the automatic high beam system from the forward recognition camera DTC No. Detection Item DTC Detection Condition Trouble Area ...

Removal
REMOVAL PROCEDURE 1. REMOVE FUEL TANK ASSEMBLY Click here 2. DISCONNECT CHARCOAL CANISTER FUEL HOSE (a) Loosen the hose clip and disconnect the charcoal canister fuel hose. 3. DISCONNECT FUEL TANK VENT HOSE (a) Push the fuel tank vent hos ...

© 2011-2024 Copyright www.ttguide.net