INSTALLATION
CAUTION / NOTICE / HINT
CAUTION:
PROCEDURE
1. INSTALL FRONT SEAT ASSEMBLY
NOTICE:
(a) Place the front seat assembly in the cabin.
(b) Install the 2 bolts on the front side of the front seat assembly.
Torque:
37 N·m {377 kgf·cm, 27 ft·lbf}
(c) Install the 2 bolts on the rear side of the front seat assembly.
Torque:
37 N·m {377 kgf·cm, 27 ft·lbf}
(d) Connect the front seat airbag connector.
(e) Connect the connectors.
(f) Engage the wire harness clamp.
2. INSTALL SEAT TRACK COVER
HINT:
Follow the same procedures for both sides.
(a) Engage the 2 claws to install the seat track cover.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque:
5.4 N·m {55 kgf·cm, 48 in·lbf}
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click here
4. INSPECT SRS WARNING LIGHT
(See page )
Turn Signal Switch Circuit
DESCRIPTION
The combination meter assembly receives the turn signal switch information and
controls the turn signal lights.
WIRING DIAGRAM
PROCEDURE
1.
READ VALUE USING TECHSTREAM (TURN SIGNAL SWITCH)
(a) Connect the Techstream to the DLC3.
(b) Turn the igni ...
Short in GPS Antenna (B15C0,B15C1)
DESCRIPTION
These DTCs are stored when a malfunction occurs in the navigation antenna assembly.
DTC No.
DTC Detection Condition
Trouble Area
B15C0
Navigation antenna error
Navigation antenna assembly
Navigatio ...
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the LIN communication system.
*: Use the Techstream.
PROCEDURE
1.
VEHICLE BROUGHT TO WORKSHOP
NEXT
...