Toyota Tacoma (2015-2018) Service Manual: Inspection

Toyota Tacoma (2015-2018) Service Manual / 2gr-fks Cooling / Radiator / Inspection

INSPECTION

PROCEDURE

1. INSPECT RADIATOR CORE SUB-ASSEMBLY

Check the core plate for damage.

Text in Illustration

*1	Core Plate
*2	Radiator Core

If the sides of the core plate groove are deformed, it is impossible to reassemble the radiator tank. Therefore, first correct any deformation using pliers or a similar tool.
Water leakage will occur if the bottom of the core plate groove is damaged or dented. Repair or replace the core plate if necessary.

NOTICE:

The radiator assembly can only be caulked twice. After being caulked twice, the radiator assembly must be replaced.

Removal

REMOVAL PROCEDURE 1. REMOVE NO. 2 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Off Road Package) 2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY 3. DRAIN ENGINE COOLANT 4. REMOVE RADIATOR GRILLE (See ...

Installation

INSTALLATION PROCEDURE 1. INSTALL RADIATOR ASSEMBLY (a) Engage the 2 hooks and temporarily install the radiator assembly to the radiator support sub-assembly. (b) Install the radiator assembly w ...

Other materials:

Diagnosis System
DIAGNOSIS SYSTEM 1. DESCRIPTION The ECU stores trouble codes when malfunctions occur. The diagnostic system allows for reading of the trouble codes from the DLC3. Use the Techstream to help diagnose and repair the problem. 2. CHECK DLC3 (a) Check the DLC3 (See page ). 3. INSPECT BATTERY VOLT ...

Clutch Pedal Switch
On-vehicle Inspection ON-VEHICLE INSPECTION PROCEDURE 1. CHECK CLUTCH START SYSTEM (a) Check that the engine does not start when the clutch pedal is released. (b) Check that the engine starts when the clutch pedal is fully depressed. If necessary, replace the clutch start switch assembly. ...

Pressure Control Solenoid "C" Actuator Stuck Off (P07957F)
SYSTEM DESCRIPTION The ECM uses the vehicle speed signal and signals from the transmission revolution sensors (NT, SP2) to detect the actual gear (1st, 2nd, 3rd, 4th, 5th or 6th gear). The ECM compares the actual gear with the shift schedule in the ECM memory to detect mechanical problems of t ...