DESCRIPTION
If forward recognition camera adjustment has not been performed or did not complete normally after the forward recognition camera was replaced with a new one, DTC C1AA9 will be stored.
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
---|---|---|---|
C1AA9 |
Front Camera Module Beam Axis Not Adjusted |
The millimeter wave radar sensor assembly detects that forward recognition camera adjustment has not been completed for 1 second or more. |
Forward recognition camera system |
PROCEDURE
1. |
GO TO FORWARD RECOGNITION CAMERA SYSTEM |
HINT:
If DTC C1AA9 is output by the pre-collision system, perform troubleshooting for the forward recognition camera system.
Click here
NEXT |
END |
Adjustment
ADJUSTMENT
PROCEDURE
1. PREPARE VEHICLE FOR FOG LIGHT AIMING ADJUSTMENT
(a) Prepare the vehicle:
HINT:
Ensure that there is no damage or deformation to the body around the
fog lights.
Fill the fuel tank.
Make sure that the oil is filled to the specified level.
Make sure ...
Installation
INSTALLATION
PROCEDURE
1. INSTALL ROOF HEADLINING ASSEMBLY
(a) Insert the roof headlining assembly into the vehicle from the door.
NOTICE:
Check that the corners of the roof headlining assembly are not
folded, twisted or otherwise deformed and that none of the ...
Rear Occupant Classification Sensor RH Circuit Malfunction (B1783)
DESCRIPTION
The rear occupant classification sensor RH circuit consists of the occupant detection
ECU and the rear occupant classification sensor RH.
DTC B1783 is set when a malfunction is detected in the rear occupant classification
sensor RH circuit.
DTC No.
DTC Detect ...