DESCRIPTION
The skid control ECU (master cylinder solenoid)*1 or skid control ECU (brake actuator assembly)*2 sends signals to the millimeter wave radar sensor assembly according to the brake control status. If the millimeter wave radar sensor assembly receives a vehicle stability control system malfunction signal from the skid control ECU (master cylinder solenoid)*1 or skid control ECU (brake actuator assembly)*2, it will store DTC C1A64.
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
---|---|---|---|
C1A69 |
Brake Control Signal Mismatch |
While the ignition switch is ON, the millimeter wave radar sensor assembly receives a vehicle stability control system malfunction signal from the skid control ECU (master cylinder solenoid)*1 or skid control ECU (brake actuator assembly)*2 for 1 second or more. |
|
CAUTION / NOTICE / HINT
NOTICE:
Click here
Click here
PROCEDURE
1. |
CHECK FOR DTCs (VEHICLE STABILITY CONTROL SYSTEM) |
HINT:
Pre-collision system DTC C1A69 may be stored due to a malfunction in the vehicle stability control system. Therefore, it is necessary to check for and troubleshoot vehicle stability control system DTCs first.
(a) Check for DTCs.
Click here
Result |
Proceed to |
---|---|
Vehicle stability control system DTCs are not output |
A |
Vehicle stability control system DTCs are output |
B |
B |
GO TO VEHICLE STABILITY CONTROL SYSTEM |
|
2. |
CHECK FOR DTCs (PRE-COLLISION SYSTEM) |
(a) Clear the DTCs.
Click here
(b) Make sure that the DTC detection conditions are met.
HINT:
If the detection conditions are not met, the system cannot detect the malfunction.
(c) Check for DTCs.
Click here
Result |
Proceed to |
---|---|
DTC C1A69 is not output |
A |
DTC C1A69 is output |
B |
A |
USE SIMULATION METHOD TO CHECK |
B |
REPLACE MILLIMETER WAVE RADAR SENSOR ASSEMBLY |
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use these procedures to troubleshoot the lighting system.
*: Use the Techstream.
PROCEDURE
1.
VEHICLE BROUGHT TO WORKSHOP
NEXT
2.
...
AV Signal Stoppage (Low Battery Voltage) (B158F)
DESCRIPTION
This DTC is stored when a video or audio signal is interrupted due to battery
voltage input to the navigation receiver assembly dropping temporarily.
DTC Code
DTC Detection Condition
Trouble Area
B158F
A video or audio sign ...
Data List / Active Test
DATA LIST / ACTIVE TEST
HINT:
By accessing the Data List displayed on the Techstream, you can perform such
functions as reading the values of switches and sensors without removing any parts.
Reading the Data List is the first step of troubleshooting and is one method to
shorten labor time.
...