DESCRIPTION
The millimeter wave radar sensor assembly receives accelerator pedal position sensor signals from the ECM to determine if the accelerator pedal is being depressed. If the ECM detects a malfunction in the accelerator pedal position sensor or SFI system, the millimeter wave radar sensor assembly is notified via CAN communication and stores DTC C1A63.
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
---|---|---|---|
C1A63 |
Other System Malfunction |
With the ignition switch ON, the millimeter wave radar sensor assembly receives an accelerator pedal position sensor malfunction signal from the ECM for approximately 2 seconds or more. |
SFI system |
PROCEDURE
1. |
GO TO SFI SYSTEM |
HINT:
If DTC C1A63 is output by the pre-collision system, perform troubleshooting for the SFI system.
NEXT |
END |
Utility
UTILITY
NOTICE:
When replacing the millimeter wave radar sensor assembly, always replace
it with a new one. If a millimeter wave radar sensor assembly which was
installed to another vehicle is used, the information stored in it will
not match the information from the vehicle. A ...
Customize Parameters
CUSTOMIZE PARAMETERS
PROCEDURE
1. CUSTOMIZE THEFT DETERRENT SYSTEM (w/ Wireless Door Lock System)
HINT:
The following items can be customized.
NOTICE:
When the customer requests a change in a function, first make sure that
the function can be customized.
Be sure to make a note ...
Room Temperature Sensor Circuit (B1411/11)
DESCRIPTION
The cooler thermistor (room temperature sensor) is installed in the instrument
panel to detect the cabin temperature which is used to control the air conditioning
system AUTO mode. The resistance of the cooler thermistor (room temperature sensor)
changes in accordance with the cab ...