To use the AUX port, connect a portable player, then select “AUX” on the “Select Audio Source” screen.
Connecting a portable audio player
■Operating portable audio players connected to the multimedia system
The volume can be adjusted using the vehicle’s audio controls. All other adjustments must be made on the portable audio player itself.
■When using a portable audio player connected to the power outlet
Noise may occur during playback. Use the power source of the portable audio player.
CAUTION
■While driving
Do not connect a portable audio player or operate the device controls.
Listening to a USB memory device
Connecting Bluetooth®Sound Quality is Bad Only when CD is Played (Volume is Too Low)
PROCEDURE
1.
REPLACE CD AND RECHECK
(a) Replace the CD with a known good one and check that the malfunction disappears.
OK:
Malfunction disappears.
OK
END
NG
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY
...
Yaw Rate Sensor (C1A46)
DESCRIPTION
If the millimeter wave radar sensor assembly receives a yaw rate sensor malfunction
signal from the yaw rate sensor (airbag sensor assembly) or yaw rate sensor zero
point malfunction signal from the skid control ECU (master cylinder solenoid)*1
or skid control ECU (brake actuator ...
Air Inlet Damper Control Servo Motor Circuit (B1442/42)
DESCRIPTION
This No. 1 air conditioning servo assembly (fresh/recirculation damper) is controlled
by the air conditioning amplifier assembly and moves the air inlet damper to the
desired position.
DTC No.
DTC Detection Condition
Trouble Area
B1 ...