Toyota Tacoma (2015-2018) Service Manual: Maintenance

Glossary Of Sae And Toyota Terms

GLOSSARY OF SAE AND TOYOTA TERMS This glossary lists all SAE-J1930 terms and abbreviations used in this manual in compliance with SAE recommendations, as well as their TOYOTA equivalents. ...

Body

General Maintenance GENERAL MAINTENANCE PROCEDURE 1. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY (a) Tighten the bolts and nuts on the chassis parts listed below, if necessary. Front axle ...

Other materials:

Removal
REMOVAL CAUTION / NOTICE / HINT NOTICE: Replace the blind spot monitor sensor if it has been dropped or subjected to a severe impact. PROCEDURE 1. REMOVE REAR BUMPER ASSEMBLY (w/ Towing Package) (See page ) 2. REMOVE REAR BUMPER ASSEMBLY (w/o Towing Package) (See page ) 3. REMOVE CONN ...

Data List / Active Test
DATA LIST / ACTIVE TEST 1. DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals ...

On-vehicle Inspection
ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT HINT: Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug (See page ). PROCEDURE 1. PERFORM SPARK TEST (a) Check for DTCs (See page ). NOTICE: If any DTC is output, perform the troubleshooting p ...