Toyota Tacoma (2015-2018) Service Manual: Front Shock Absorber

Reassembly

REASSEMBLY PROCEDURE 1. INSTALL FRONT LOWER ARM BUSH NO. 1 (a) Install a new lower arm bush using SST, a press and steel plate. SST: 09631-12090 SST: 09631-32020 NOTICE: Push the lower arm bu ...

Components

COMPONENTS ILLUSTRATION ILLUSTRATION ...

Other materials:

Terminals Of Ecu
TERMINALS OF ECU 1. CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (a) Disconnect the C27 and C29 certification ECU (smart key ECU assembly) connectors. (b) Measure the voltage and resistance according to the value(s) in the table below. HINT: Measure the values on the wire harness side w ...

Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by check ...

Steering Angle Sensor Initialization Incomplete (C1439,C1445)
DESCRIPTION The skid control ECU (master cylinder solenoid) acquires steering angle sensor (spiral cable with sensor sub-assembly) zero point every time the ignition switch is turned to ON and the vehicle is driven at 35 km/h (22 mph) or more for approximately 5 seconds. The ECU also stores t ...