Removal
REMOVAL
PROCEDURE
1. REMOVE FRONT WHEEL
2. INSPECT FRONT SUSPENSION LOWER ARM
(a) Install the hub nuts onto the disc.
(b) Using a dial indicator, check the lower ball joint for excessive play when
you push the hub nuts up and down with a force of 294 N (30 kgf, 66 lbf).
Maximum:
0.5 mm ( ...
Precaution
PRECAUTION
1. PRECAUTION FOR HEADLIGHT BULB REPLACEMENT
(a) When any defects such as deformation, cracks, dents, chipping, etc. are identified
on the headlight, replace it with a new one.
(b) Even if the operation seems to be normal, the fail-safe function may be defective.
(c) Since halogen b ...
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
PROCEDURE
1. REPAIR INSTRUCTION
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
Heating Te ...