Toyota Tacoma (2015-2018) Service Manual: Sending Malfunction (Navigation to APGS) (U0073,U0100,U0129,U0140,U0155,U0164)

Toyota Tacoma (2015-2018) Service Manual / Navigation / Multi Info Display / Navigation System / Sending Malfunction (Navigation to APGS) (U0073,U0100,U0129,U0140,U0155,U0164)

DESCRIPTION

These DTCs are stored when a malfunction occurs in the CAN communication circuit.

DTC Code	DTC Detection Condition	Trouble Area
U0073	CAN bus connection error	CAN communication system
U0100	CAN reception error
U0129	CAN reception error
U0140	CAN reception error
U0155	CAN reception error
U0164	CAN reception error

PROCEDURE

1.	CHECK FOR DTC

(a) Clear the DTCs (See page (b) Recheck for DTCs and check that no DTCs are output (See page ).

(b) Recheck for DTCs and check that no DTCs are output (See page OK: ).

OK:

No DTCs are output.

USE SIMULATION METHOD TO CHECK

GO TO CAN COMMUNICATION SYSTEM

Speaker Output Short (B15C3)

DESCRIPTION This DTC is stored when a malfunction occurs in the speakers. DTC No. DTC Detection Condition Trouble Area B15C3 A short is d ...

Stereo Component Amplifier Disconnected (B15D3)

DESCRIPTION The navigation receiver assembly and stereo component amplifier assembly are connected by the AVC-LAN communication line. When an AVC-LAN communication error occurs between the navigat ...

Other materials:

Precaution
PRECAUTION IGNITION SWITCH EXPRESSIONS (a) The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section. Expression Ignition Switch (Position) Engine Swi ...

Speaker Circuit
DESCRIPTION If there is a short in a speaker circuit, the stereo component amplifier assembly*1 or navigation receiver assembly*2 detects it and stops output to the speakers. Thus sound cannot be heard from the speakers even if there is no malfunction in the stereo component amplifier assembly ...

Parking Brake Lever
Components COMPONENTS ILLUSTRATION ILLUSTRATION Installation INSTALLATION PROCEDURE 1. INSTALL PARKING BRAKE SWITCH ASSEMBLY 2. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY (a) Install the 2 toothed washers and parking brake lever support to the parking brake lever. (b) Install th ...