REMOVAL
PROCEDURE
1. REMOVE ROOF HEADLINING ASSEMBLY (for LED Type Stop Light)
(See page )
(See page )
2. REMOVE CENTER STOP LIGHT ASSEMBLY (for Bulb Type Stop Light)
(a) Apply protective tape around the center stop light assembly.
Text in Illustration
Protective Tape |
(b) Remove the 2 screws and separate the center stop light assembly. |
|
(c) Disconnect the connector to remove the center stop light assembly. |
|
(d) Turn the 3 center stop light sockets with the 3 center stop light bulbs in the direction indicated by the arrow shown in the illustration to remove them. |
|
(e) To remove the 3 center stop light sockets and bulbs, turn them in the direction indicated by the arrow in the illustration.
3. REMOVE CENTER STOP LIGHT ASSEMBLY (for LED Type Stop Light)
(a) Remove the 2 nuts. |
|
(b) Apply protective tape around the center stop light assembly.
Text in Illustration
Protective Tape |
(c) Using a moulding remover D, disengage the 2 clips to separate the center stop light assembly. |
|
(d) Disconnect the connector to remove the center stop light assembly. |
|
Invalid Data Received from Deceleration Sensor (C1442,C1443)
DESCRIPTION
The airbag sensor assembly has a built-in yaw rate and acceleration sensor.
The skid control ECU (brake actuator assembly) receives signals from the yaw
rate and acceleration sensor (airbag sensor assembly) via the CAN communication
system.
DTC No.
Detection ...
Removal
REMOVAL
CAUTION / NOTICE / HINT
CAUTION:
Some of these service operations affect the SRS airbag system. Read
the precautionary notices concerning the SRS airbag system before servicing
(See page ).
If the side airbag was deployed, replace the front seat assembly with
a ne ...
Wireless Charger Assembly
Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE FRONT CONSOLE BOX
(See page
)
2. REMOVE MOBILE WIRELESS CHARGER CRADLE ASSEMBLY
(a) Remove the 5 screws and mobile wireless charger cradle assembly.
Install ...