Toyota Tacoma (2015-2018) Service Manual: Rear Axle Shaft

Rear Axle Hub Bolt

Installation INSTALLATION PROCEDURE 1. INSTALL REAR AXLE HUB BOLT (a) Install a new hub bolt through the axle hub. (b) Install the washer plate, as shown in the illustration, through the hub ...

Components

COMPONENTS ILLUSTRATION ILLUSTRATION ...

Other materials:

CD cannot be Inserted / Played or CD is Ejected Right After Insertion
PROCEDURE 1. CHECK IF A PROPER CD IS INSERTED (a) Make sure that the CD is an audio CD or a CD with an MP3, WMA or AAC file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective. OK: CD is normal. HINT: Translucent or uniq ...

Dtc Check / Clear
DTC CHECK / CLEAR 1. CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Main Body / Trouble Codes. (e) Check for DTCs. 2. CLEAR DTC (a) Connect the Techstream to the DLC3. (b) Turn t ...

Short in Front Passenger Side Squib 2nd Step Circuit (B1815/54-B1818/54)
DESCRIPTION The front passenger side squib 2nd step circuit consists of the airbag sensor assembly and the instrument panel passenger without door airbag assembly. The circuit signals the SRS to deploy when airbag deployment conditions are met. These DTCs are set when a malfunction is detected ...