DTC CHECK / CLEAR
1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Trouble Codes.
(e) Check for DTCs.
2. CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Trouble Codes.
(e) Clear the DTCs.
Torque Converter Clutch Pressure Control Solenoid Control Circuit Electrical
(Shift Solenoid Valve SLU) (P2759)
DESCRIPTION
Refer to the system description for DTC P2757 (See page
).
DTC No.
DTC Detection Condition
Trouble Area
P2759
Open or short is detected in shift solenoid valve SLU circuit for 1 second
or more while driving (1 trip dete ...
Communication Error from ECM to VSC Invalid Serial Data Received (P163181)
DESCRIPTION
The ECM sends signals such as dynamic radar cruise control operation signals,
brake operation demand signals and buzzer operation demand signals to the skid control
ECU (master cylinder solenoid)*1 or skid control ECU (brake actuator assembly)*2
when the dynamic radar cruise contr ...
Yaw Rate Sensor Circuit (C1AA4,C1AA5)
DESCRIPTION
The forward recognition camera receives vehicle stability signals from the yaw
rate and acceleration sensor (airbag sensor assembly). If the yaw rate and acceleration
sensor (airbag sensor assembly) detects an abnormal yaw rate sensor signal or yaw
rate sensor assembly power suppl ...