PROBLEM SYMPTOMS TABLE
HINT:
Symptom |
Suspected Area |
See page |
---|---|---|
Security indicator light does not illuminate when theft deterrent system is set by key linked operation, wireless operation*1 or entry operation*2. |
Proceed to "Theft Deterrent System cannot be Set or Unset" |
|
After doors are locked by key linked operation, wireless operation*1 or entry operation*2 while engine hood is open, theft deterrent system cannot be set by closing the engine hood. |
||
Theft deterrent system cannot be unset by key link unlock, wireless door unlock*1 or entry door unlock*2. |
||
Theft deterrent system unexpectedly sets itself.*1 |
Proceed to "Theft Deterrent System Unexpectedly Sets Itself" |
|
Theft deterrent system cannot be unset by turning the engine on. |
Proceed to "Theft Deterrent System is not Unset when Engine is Running" |
|
While alarm is armed, battery is reconnected but alarm does not sound. |
Proceed to "While Alarm is Armed, Battery is Reconnected but Alarm does not Sound" |
|
While alarm is armed, engine hood opened but alarm does not sound. |
Proceed to "While Alarm is Armed, Engine Hood is Opened but Alarm does not Sound" |
|
Security indicator light does not operate. |
Proceed to engine immobiliser system "Security Indicator Light Does not Blink"*2 |
|
Proceed to engine immobiliser system "Security Indicator Light Does not Blink"*3 |
|
|
Headlights, taillights or hazard warning lights do not flash while theft deterrent system is in warning operation. |
Proceed to "Some Alarm Functions do not Operate" |
|
Interior lights do not illuminate while theft deterrent system is in warning operation. |
||
Vehicle horn do not sound while theft deterrent system is in warning operation. |
||
Security horn do not sound while theft deterrent system is in warning operation. |
Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for both the RH and LH sides.
The procedure described below is for the LH side.
PROCEDURE
1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting
the cable f ...
Removal
REMOVAL
PROCEDURE
1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)
Transmission
See page
AC60E
AC60F
2. REMOVE MANUAL TRANSMISSION ASSEMBLY (for Manual Transmission)
(See page )
...
Entune Audio
Operations such as listening to audio, using the hands-free phone, confirming
vehicle information and changing multimedia system settings are started by using
the following buttons.
Multimedia system operation buttons
button
Press this button to access the Bluetooth® hands-free system.
...