Toyota Tacoma (2015-2018) Service Manual: Operation Check
OPERATION CHECK
1. CHECK FUNCTION
(a) Check that the key reminder warning buzzer sounds.
(1) With the driver side door closed, insert the key into the ignition key cylinder and then turn the key to LOCK or ACC.
(2) Check that the buzzer sounds intermittently when the driver side door is open.
(b) Check that the key reminder warning buzzer stops.
(1) Check that the buzzer stops sounding if any of the following operations are performed while the buzzer is sounding:
- Close the driver side door (front door courtesy light switch is off).
- Turn the ignition switch to ON.
- Pull the key out from the ignition key cylinder.
Customize Parameters
CUSTOMIZE PARAMETERS
1. CUSTOMIZING WITH THE TECHSTREAM
HINT:
The following items can be customized.
NOTICE:
When the customer requests a change in a function, first make sure that
th ...
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms.
If multiple suspected areas are listed, the potential causes of the symptoms
are lis ...
Other materials:
Distance Control Switch Circuit
DESCRIPTION
The distance control switch is used to set the distance for vehicle-to-vehicle
distance control mode. The distance control switch is installed in the steering
pad switch assembly. The vehicle-to-vehicle distance set value can be changed by
operating the steering pad switch assembl ...
Front Floor Footrest
Components
COMPONENTS
ILLUSTRATION
Installation
INSTALLATION
PROCEDURE
1. INSTALL FRONT FLOOR FOOTREST
(a) Engage the 2 clips to install the front floor footrest.
2. INSTALL FRONT FLOOR CARPET ASSEMBLY
(a) Return the fron ...
Removal
REMOVAL
PROCEDURE
1. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY
(a) Place matchmarks on the propeller shaft flange yoke and differential
flange.
Text in Illustration
*a
Matchmark
...
