CUSTOMIZE PARAMETERS
1. CUSTOMIZING WITH THE TECHSTREAM
HINT:
The following items can be customized.
NOTICE:
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Combination Meter / Utility / Customize / Warning.
(e) Select the setting by referring to the table below.
Warning
Display |
Default |
Function |
Setting |
Relevant ECU |
---|---|---|---|---|
Key Remind Sound |
Slow |
Function to change cycle of the key reminder warning buzzer. |
Normal, Slow or Fast |
Combination meter assembly |
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
The ECM of this system is connected to the CAN communication system.
Therefore, before starting troubleshooting, make sure to check that there
is no trouble in the CAN and multiplex communication system.
*: Use the Techstream.
PROCEDURE
...
Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY
(a) Connect the connector to install the indicator light wire sub-assembly
to the shift position indicator.
(b) Attach the clamp to install the indicator light wire sub ...
System Description
SYSTEM DESCRIPTION
1. GENERAL
(a) The air conditioning system has the following controls.
Control
Outline
Manual Control
The air conditioner amplifier assembly controls the damper positions
(air inlet control damper, air mix control damper and ...