FAIL-SAFE CHART
FAIL-SAFE FUNCTION
(a) When a malfunction occurs in the lane departure alert system, a message will be displayed on the multi-information display in the combination meter assembly and the lane departure alert system will be disabled depending on the malfunction.
Warning Message |
Cause |
Fail-safe Operation |
Conditions to Return to Normal Condition |
|
---|---|---|---|---|
Lane Departure Alert Function |
Vehicle Sway Warning |
|||
Lane Departure Alert Malfunction Visit Your Dealer |
Lane departure alert system is malfunctioning |
X |
X |
After system returns to normal, ignition switch is turned off and then to ON |
Front Camera Unavailable |
|
X |
X |
|
Front Camera Vision Blocked Clean and Demist Windshield |
Forward recognition camera view is unclear |
X |
X |
Forward recognition camera or area of windshield glass in front of forward recognition camera is cleaned |
X: Control is suspended
Removal
REMOVAL
PROCEDURE
1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting
the cable from the negative (-) battery terminal.
Therefore, make sure to read the disconnecting the cable from the negative (-)
battery terminal notices before p ...
Terminals Of Ecm
TERMINALS OF ECM
HINT:
The standard normal voltage between each pair of ECM terminals is shown in the
table below. The appropriate conditions for checking each pair of terminals are
also indicated. The result of checks should be compared with the standard normal
voltage for that pair of te ...
Seat belts
Make sure that all occupants are wearing their seat belts before driving the
vehicle.
■ Correct use of the seat belts
● Extend the shoulder belt so that it comes fully over the shoulder, but does
not come into contact with the neck or slide off the shoulder.
● Position the ...