CUSTOMIZE PARAMETERS
1. CUSTOMIZE FUNCTION WITH TECHSTREAM
NOTICE:
HINT:
The following items can be customized using the Techstream.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Combination Meter / Utility / Customize / Warning.
(e) Select the setting by referring to the table below.
Combination Meter
Tester Display |
Default |
Content |
Setting |
---|---|---|---|
Driver Side Seatbelt Warning Buzzer |
ON |
Function to sound the seat belt warning buzzer |
ON/OFF |
Front Passenger Side Seatbelt Warning Buzzer |
ON |
Function to sound the seat belt warning buzzer |
ON/OFF |
HINT:
This setting is only valid for the buzzer which sounds at 20 km/h (12.4 mph) or more.
Rear Power Outlet Socket
Components
COMPONENTS
ILLUSTRATION
ILLUSTRATION
Installation
INSTALLATION
PROCEDURE
1. INSTALL POWER OUTLET SOCKET ASSEMBLY
(a) Install the clamp.
(b) Connect the connector.
(c) Using a torx socket wrench T30, install the 4 screws and the power
outlet socket assemb ...
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
Perform "Inspection After Repairs" after replacing the fuel injector assembly
(See page ).
PROCEDURE
1. INSTALL FUEL INJECTOR ASSEMBLY
HINT:
Perform "Inspection After Repairs" after replacing the fuel injector assembly
(See p ...
Parts Location
PARTS LOCATION
ILLUSTRATION
*A
for Double Cab
*B
for Access Cab
*C
w/ Back Door Power Window
-
-
*1
NO. 1 BACK PANEL PELAY
*2
NO. 2 BACK PANEL RELAY
...