DESCRIPTION
Refer to DTCs C1419 and C1435 (See page ).
DTC Code |
DTC Detection Condition |
Trouble Area |
---|---|---|
C1420 |
After the difference between GL1 and GL2 becomes 0.6 G or more with the vehicle stationary, the difference remains 0.4 G or more for 60 seconds or more. |
|
WIRING DIAGRAM
Refer to DTCs C1232, C1243 and C1245 (See page ).
CAUTION / NOTICE / HINT
NOTICE:
When replacing the yaw rate and acceleration sensor (airbag sensor assembly), perform calibration (See page ).
PROCEDURE
1. |
CHECK CAN COMMUNICATION SYSTEM |
(a) Check for DTCs (See page ).
Result
Result |
Proceed to |
---|---|
CAN DTC is not output |
A |
CAN DTC is output |
B |
B |
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) |
|
2. |
CHECK AIRBAG SENSOR ASSEMBLY INSTALLATION |
(a) Check that the yaw rate and acceleration sensor (airbag sensor assembly) is installed properly (See page ).
OK:
The sensor is tightened to the specified torque.
The sensor is not installed at an angle.
OK |
REPLACE AIRBAG SENSOR ASSEMBLY |
NG |
INSTALL AIRBAG SENSOR ASSEMBLY CORRECTLY |
Installation
INSTALLATION
PROCEDURE
1. INSTALL TRANSFER POSITION SWITCH
(a) Attach the 2 claws to install the transfer position switch.
2. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning
System)
(See page )
3. INSTALL INTEGRATION PANEL SUB-ASSEMBLY (for Manual Cooler System)
...
Manual Transmission Unit
Components
COMPONENTS
ILLUSTRATION
ILLUSTRATION
*1
SHIFT DETENT BALL PLUG
*2
SHIFT DETENT BALL COMPRESSION SPRING
*3
MANUAL TRANSMISSION FILLER PLUG
*4
SHAFT DETENT BALL
*5
...
Vehicle Control History
VEHICLE CONTROL HISTORY
1. Function Overview
(a) The vehicle control history is a function that records control data (record
data) when triggered by specific vehicle behavior. When DTCs are not detected according
to information provided by customers, by checking the vehicle control history, it ...