TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Brake Control / Dynamic Control Systems / Traction Off Switch

Toyota Tacoma (2015-2018) Service Manual: Traction Off Switch

Components

COMPONENTS

ILLUSTRATION

Removal

Removal

REMOVAL

PROCEDURE

1. REMOVE ROOF CONSOLE BOX ASSEMBLY

(See page 2. REMOVE A-TRAC SWITCH (TRACTION CONTROL SWITCH) )

2. REMOVE A-TRAC SWITCH (TRACTION CONTROL SWITCH)

(a) Disconnect the A-TRAC switch (traction control switch) connector.

(b) Using a screwdriver, detach the 2 claws and remove the A-TRAC switch (traction control switch) from the roof console box assembly.

Inspection

INSPECTION

PROCEDURE

1. INSPECT A-TRAC SWITCH (TRACTION CONTROL SWITCH)

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Text in Illustration

*a

Component without harness connected

(A-TRAC Switch (Traction Control Switch))

Standard Resistance:

Tester Connection

Switch Condition

Specified Condition

5 - 8

Pressed

Below 1 Ω

Not pressed

10 kΩ or higher

If the value is not as specified, replace the A-TRAC switch (traction control switch).

Installation

INSTALLATION

PROCEDURE

1. INSTALL A-TRAC SWITCH (TRACTION CONTROL SWITCH)

(a) Attach the 2 claws to install the A-TRAC switch (traction control switch) into the roof console box assembly.

(b) Connect the A-TRAC switch (traction control switch) connector.

2. INSTALL ROOF CONSOLE BOX ASSEMBLY

(See page Vehicle Stability Control System(for Hydraulic Brake Booster) )

    Related Tacoma materials

    Removal
    REMOVAL CAUTION / NOTICE / HINT HINT: If the bumper is damaged, there is a possibility that the installation area of the blind spot monitor sensor may be deformed and the blind spot monitor system may not operate correctly, so visually inspect the blind spot monitor sensor installation area ...

    Data List / Active Test
    DATA LIST / ACTIVE TEST 1. ACTIVE TEST HINT: Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered befo ...

    Parts Location
    PARTS LOCATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ...