Components

COMPONENTS

ILLUSTRATION

ILLUSTRATION

ILLUSTRATION

Installation

Installation

INSTALLATION

PROCEDURE

1. INSTALL POWER OUTLET SOCKET ASSEMBLY

(a) Install the clamp.

(a) Install the clamp.

(b) Connect the connector.

(c) Using a torx socket wrench T30, install the 4 screws and the power outlet socket assembly.

Torque:

5.0 N·m {51 kgf·cm, 44 in·lbf}

NOTICE:

Install the screws in the order shown the illustration.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:

5.4 N·m {55 kgf·cm, 48 in·lbf}

Removal

REMOVAL

PROCEDURE

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE POWER OUTLET SOCKET ASSEMBLY

(a) Using a torx socket wrench T30, remove the 4 screws.

(a) Using a torx socket wrench T30, remove the 4 screws.

(b) Disconnect the connector.

(c) Remove the clamp and the power outlet socket assembly.