ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT OCCUPANT DETECTION ECU (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check (See page
.gif)
).
2. INSPECT OCCUPANT DETECTION ECU (for Vehicle Involved in Collision)
(a) Perform a diagnostic system check (See page
).
(b) Even if the airbag was not deployed, perform a visual check for damage to the occupant detection ECU. If there are any defects as mentioned below, replace the occupant detection ECU with a new one:
- Cracks, dents or chips in the case.
- Cracks or other damage to the connector.
CAUTION:
For removal and installation procedures of the occupant detection ECU, see page
, and
. be sure to
follow the correct procedure.
