Inspection
INSPECTION
PROCEDURE
1. INSPECT HEADLIGHT DIMMER RELAY
(a) Check the resistance.
|
(1) Measure the resistance according to the value(s) in the table below.
Standard:
|
Tester Connection
|
Condition
|
Specified Condition
|
|
3 - 5
|
Battery voltage not applied to terminals 1 and 2
|
10 kΩ or higher
|
|
Battery voltage applied to terminals 1 and 2
|
Below 1 Ω
|
If the result is not as specified, replace, the headlight dimmer relay.
|
|
REASSEMBLY
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for both the LH and RH sides.
The procedure described below is for the LH side.
PROCEDURE
1. INSTALL CLEARANCE LI ...
