TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Vf2cm Transfer / Touch Select 2-4 And High-low System / Dtc Check / Clear

Toyota Tacoma (2015-2018) Service Manual: Dtc Check / Clear

DTC CHECK / CLEAR

1. CHECK DTC

(a) Check the DTCs.

(1) Turn the ignition switch off.

(2) Connect the Techstream to the DLC3.

(3) Turn the ignition switch to ON.

(4) Turn the Techstream on.

(5) Read the DTCs following the prompts on the Techstream screen. Enter the following menus: Powertrain / Four Wheel Drive / Trouble Codes.

(6) Check the details of the DTCs (See page ). 2. CLEAR DTC ).

2. CLEAR DTC

(a) Clear the DTCs.

(1) Turn the ignition switch off.

(2) Connect the Techstream to the DLC3.

(3) Turn the ignition switch to ON.

(4) Turn the Techstream on.

(5) Operate the Techstream to clear the DTCs. Enter the following menus: Powertrain / Four Wheel Drive / Trouble Codes.

(6) According to the display on the Techstream, select the trouble code data display with the clear button.

    Related Tacoma materials

    Installation
    INSTALLATION PROCEDURE 1. INSTALL FRONT CRANKSHAFT OIL SEAL (a) Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing chain cover assembly edge. SST: 09223-22010 SST: 09506-35010 NOTICE: Keep the lip free from foreign matt ...

    Disassembly
    DISASSEMBLY PROCEDURE 1. FIX VANE PUMP (a) Using SST, fix the vane pump assembly in a vise. SST: 09630-00014 09631-00132 NOTICE: When using a vise, do not overtighten it. 2. REMOVE VANE PUMP OIL RESERVOIR SUB-ASSEMBLY (a) Remove the 3 bolts and vane pump oil reservoir. (b) Remove the O-r ...

    Key Reminder Buzzer does not Sound
    DESCRIPTION The key reminder warning buzzer sounds when the driver side door is opened while the ignition switch is in the LOCK or ACC positions. The key reminder warning buzzer is activated when the main body ECU (multiplex network body ECU) sends a key switch signal and driver side courtesy ...