Brake Fluid(for Hydraulic Brake Booster)
On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT FLUID LEVEL IN RESERVOIR
(a) Turn the ignition switch to OFF, and depress the brake pedal more
than 40 times (unti ...
On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT FLUID LEVEL IN RESERVOIR
(a) Check the fluid level.
If the brake fluid level is lower than the MIN line, check for leaks and inspect
the disc brake p ...
Related Tacoma materials
Power Source Control ECU Malfunction (B2782)
DESCRIPTION
DESCRIPTION The certification ECU (smart key ECU assembly) has a power source
mode switching function.
This DTC is stored when the IGE input (the steering lock motor activation permission
signal) sent directly from the certification ECU (smart key ECU assembly) to the
steering lo ...
Rear Occupant Classification Sensor LH Collision Detection (B1787)
DESCRIPTION
DTC B1787 is set when the occupant detection ECU receives a collision detection
signal, which is sent by the occupant classification sensor rear LH when an accident
occurs.
DTC B1787 is also set when the front seat with adjuster frame assembly RH is
subjected to a strong impact, ...
Replacement
REPLACEMENT
PROCEDURE
1. REPLACE AUTOMATIC TRANSMISSION FLUID
(a) Lift the vehicle. [*1]
NOTICE:
Set the vehicle on a lift so that the vehicle is kept level when it is lifted
up (make sure that the tilt angle from the front to rear of the vehicle is within
+/-1°).
(b) Remove th ...