Toyota Tacoma (2015-2018) Service Manual: Removal

Toyota Tacoma (2015-2018) Service Manual / Lighting / Fog Light Assembly(for Led Fog Light) / Removal

REMOVAL

CAUTION / NOTICE / HINT

HINT:

Use the same procedure for both the LH and RH sides.
The procedure described below is for the LH side.

PROCEDURE

1. REMOVE FRONT NO. 1 WHEEL OPENING EXTENSION PAD

Click here

2. SEPARATE FRONT FENDER LINER

(a) Remove the 2 screws to separate the front fender liner.

3. REMOVE FOG LIGHT ASSEMBLY

(a) Disconnect the connector.

(b) Remove the screw.

Adjustment

ADJUSTMENT PROCEDURE 1. PREPARE VEHICLE FOR FOG LIGHT AIMING ADJUSTMENT (a) Prepare the vehicle: HINT: Ensure that there is no damage or deformation to the body around the fog lights. ...

Installation

INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for both the LH and RH sides. The procedure described below is for the LH side. PROCEDURE 1. INSTALL FOG LAMP A ...

Other materials:

Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE STEERING GEAR OUTLET RETURN TUBE (a) Using a union nut wrench, remove the steering gear outlet return tube. 2. REMOVE STEERING TURN PRESSURE TUBE (a) Using a union nut wrench, remove the 2 pressure tubes. (b) Remove the 4 O-rings from the pressure tubes. 3. ...

Reassembly
REASSEMBLY PROCEDURE 1. INSTALL INSTRUMENT PANEL CUSHION (a) Install a new instrument panel cushion as shown in the illustration. Text in Illustration *a R End *b 25 to 45 mm (0.984 to 1.772 in.) ...

Inspection
INSPECTION PROCEDURE 1. INSPECT REAR SPEAKER ASSEMBLY (w/o Amplifier Box Speaker Assembly) (a) Measure the resistance according to the value(s) in the table below. Standard resistance: Tester Connection Condition Specified Condition 1 - 2 ...