REMOVAL
CAUTION / NOTICE / HINT
HINT:
When removing the name plates or stripe tapes, heat the vehicle body or tail gate and name plates or stripe tapes using a heat light.
Heating Temperature
Item |
Temperature |
---|---|
Vehicle Body or Tail Gate |
40 to 60°C (104 to 140°F) |
Name Plate or Stripe Tape |
20 to 30°C (68 to 86°F) |
NOTICE:
Do not heat the vehicle body, tail gate, name plate or stripe tape excessively.
PROCEDURE
1. REMOVE NO. 1 FRONT DOOR NAME PLATE (for LH Side)
(a) Put protective tape around the No. 1 front door name plate. |
|
(b) Insert a piano wire between the vehicle body and No. 1 front door name plate.
(c) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
(d) Pull the piano wire and cut the double-sided tape that holds the No. 1 front door name plate to the vehicle body.
NOTICE:
(e) Remove the No. 1 front door name plate.
(f) Remove the protective tape.
(g) for LED Fog Light: (1) Put protective tape around the No. 1 front door name plate. (2) Insert a piano wire between the vehicle body and No. 1 front door name plate. (3) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends. (4) Pull the piano wire and cut the double-sided tape that holds the No. 1 front door name plate to the vehicle body. NOTICE:
(5) Remove the No. 1 front door name plate. (6) Remove the protective tape. |
|
2. REMOVE NO. 1 FRONT DOOR NAME PLATE (for RH Side)
(a) Put protective tape around the No. 1 front door name plate. |
|
(b) Insert a piano wire between the vehicle body and No. 1 front door name plate.
(c) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
(d) Pull the piano wire and cut the double-sided tape that holds the No. 1 front door name plate to the vehicle body.
NOTICE:
(e) Remove the No. 1 front door name plate.
(f) Remove the protective tape.
(g) for LED Fog Light: (1) Put protective tape around the No. 1 front door name plate. (2) Insert a piano wire between the vehicle body and No. 1 front door name plate. (3) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends. (4) Pull the piano wire and cut the double-sided tape that holds the No. 1 front door name plate to the vehicle body. NOTICE:
(5) Remove the No. 1 front door name plate. (6) Remove the protective tape. |
|
3. REMOVE NO. 1 ROOF SIDE NAME PLATE (for LH Side)
(a) for Access Cab:
(1) Put protective tape around the No. 1 roof side name plate. |
|
(2) Insert a piano wire between the vehicle body and No. 1 roof side name plate.
(3) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
(4) Pull the piano wire and cut the double-sided tape that holds the No. 1 roof side name plate to the vehicle body.
NOTICE:
(5) Remove the No. 1 roof side name plate.
(6) Remove the protective tape.
(b) for Double Cab Type A:
(1) Put protective tape around the No. 1 roof side name plate. |
|
(2) Insert a piano wire between the vehicle body and No. 1 roof side name plate.
(3) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
(4) Pull the piano wire and cut the double-sided tape that holds the No. 1 roof side name plate to the vehicle body.
NOTICE:
(5) Remove the No. 1 roof side name plate.
(6) Remove the protective tape.
(c) for Double Cab Type B:
(1) Put protective tape around the No. 1 roof side name plate. |
|
(2) Insert a piano wire between the vehicle body and No. 1 roof side name plate.
(3) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
(4) Pull the piano wire and cut the double-sided tape that holds the No. 1 roof side name plate to the vehicle body.
NOTICE:
(5) Remove the No. 1 roof side name plate.
(6) Remove the protective tape.
4. REMOVE NO. 1 ROOF SIDE NAME PLATE (for RH Side)
(a) for Access Cab:
(1) Put protective tape around the No. 1 roof side name plate. |
|
(2) Insert a piano wire between the vehicle body and No. 1 roof side name plate.
(3) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
(4) Pull the piano wire and cut the double-sided tape that holds the No. 1 roof side name plate to the vehicle body.
NOTICE:
(5) Remove the No. 1 roof side name plate.
(6) Remove the protective tape.
(b) for Double Cab Type A:
(1) Put protective tape around the No. 1 roof side name plate. |
|
(2) Insert a piano wire between the vehicle body and No. 1 roof side name plate.
(3) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
(4) Pull the piano wire and cut the double-sided tape that holds the No. 1 roof side name plate to the vehicle body.
NOTICE:
(5) Remove the No. 1 roof side name plate.
(6) Remove the protective tape.
(c) for Double Cab Type B:
(1) Put protective tape around the No. 1 roof side name plate. |
|
(2) Insert a piano wire between the vehicle body and No. 1 roof side name plate.
(3) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
(4) Pull the piano wire and cut the double-sided tape that holds the No. 1 roof side name plate to the vehicle body.
NOTICE:
(5) Remove the No. 1 roof side name plate.
(6) Remove the protective tape.
5. REMOVE NO. 2 REAR BODY NAME PLATE (for 4WD)
(a) Put protective tape around the No. 2 rear body name plate. |
|
(b) Insert a piano wire between the tail gate and No. 2 rear body name plate.
(c) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
(d) Pull the piano wire and cut the double-sided tape that holds the No. 2 rear body name plate to the tail gate.
NOTICE:
(e) Remove the No. 2 rear body name plate.
(f) Remove the protective tape.
6. REMOVE NO. 3 REAR BODY NAME PLATE (for 2GR-FKS)
(a) Put protective tape around the No. 3 rear body name plate. |
|
(b) Insert a piano wire between the tail gate and No. 3 rear body name plate.
(c) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
(d) Pull the piano wire and cut the double-sided tape that holds the No. 3 rear body name plate to the tail gate.
NOTICE:
(e) Remove the No. 3 rear body name plate.
(f) Remove the protective tape.
7. REMOVE REAR BODY STRIPE LH (w/ Stripe Tape)
(a) Pull back an edge of the rear body stripe LH and pull it parallel to the vehicle body to remove it. |
|
8. REMOVE REAR BODY STRIPE RH (w/ Stripe Tape)
HINT:
Use the same procedure described for the LH side.
Terminals Of Ecu
TERMINALS OF ECU
1. ECM
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
E14-20 (TC) - E11-1 (E1)
G - W-B
DTC output signal
Ignition switch ON
...
Removal
REMOVAL
PROCEDURE
1. REMOVE REAR SEAT CUSHION ASSEMBLY
2. REMOVE NO. 4 ROOM PARTITION COVER LH
3. REMOVE NO. 4 ROOM PARTITION COVER RH
4. REMOVE NO. 3 ROOM PARTITION COVER
5. REMOVE BACK PANEL GARNISH HOLE PLUG
6. REMOVE BACK PANEL TRIM
7. REMOVE FRONT DOOR SCUFF PLATE ...
Removal
REMOVAL
PROCEDURE
1. REMOVE FUEL TANK ASSEMBLY
Click here
2. DISCONNECT CHARCOAL CANISTER FUEL HOSE
(a) Loosen the hose clip and disconnect the charcoal canister fuel hose.
3. DISCONNECT FUEL TANK VENT HOSE
(a) Push the fuel tank vent hos ...