TERMINALS OF ECU
1. ECM
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
---|---|---|---|---|
E14-20 (TC) - E11-1 (E1) |
G - W-B |
DTC output signal |
Ignition switch ON |
11 to 14 V |
E14-20 (TC) - E11-1 (E1) |
G - W-B |
DTC output signal |
Ignition switch ON Connect terminals TC and CG of DLC3 |
Below 2 V |
E13-15 (ST1-) - E11-1 (E1) |
V - W-B |
Cruise cancel input signal |
Ignition switch ON Depress Brake pedal |
Below 1 V |
E13-15 (ST1-) - E11-1 (E1) |
V - W-B |
Cruise cancel input signal |
Ignition switch ON Release brake pedal |
11 to 14 V |
E13-16 (STP) - E11-1 (E1) |
P - W-B |
Stop light switch input signal |
Depress brake pedal |
11 to 14 V |
E13-16 (STP) - E11-1 (E1) |
P - W-B |
Stop light switch input signal |
Release brake pedal |
Below 1 V |
E13-17 (CCS) - E11-1 (E1) |
B - W-B |
Cruise control main switch output signal |
Ignition switch ON |
11 to 14 V |
E13-17 (CCS) - E11-1 (E1) |
B - W-B |
Cruise control main switch output signal |
Ignition switch ON CANCEL switch ON |
6.6 to 10.1 V |
E13-17 (CCS) - E11-1 (E1) |
B - W-B |
Cruise control main switch output signal |
Ignition switch ON -(COAST)/SET switch ON |
4.5 to 7.1 V |
E13-17 (CCS) - E11-1 (E1) |
B - W-B |
Cruise control main switch output signal |
Ignition switch ON +(ACCEL)/RES switch ON |
2.3 to 4 V |
E13-17 (CCS) - E11-1 (E1) |
B - W-B |
Cruise control main switch output signal |
Ignition switch ON MAIN switch ON |
Below 1 V |
E11-1 (E1) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 V |
E12-27 (D) - E11-1 (E1)*1 |
R - W-B |
Park/neutral position switch signal |
Ignition switch ON, shift lever D or 3 positions |
11 to 14 V |
E12-27 (D) - E11-1 (E1)*1 |
R - W-B |
Park/neutral position switch signal |
Ignition switch ON, shift lever other than D and 3 positions |
Below 1 V |
E12-27 (D) - E11-1 (E1)*2 |
R - W-B |
Clutch switch input signal |
Ignition switch ON Depress clutch pedal |
Below 1 V |
E12-27 (D) - E11-1 (E1)*2 |
R - W-B |
Clutch switch input signal |
Ignition switch ON Release clutch pedal |
11 to 14 V |
Installation
INSTALLATION
PROCEDURE
1. INSTALL ROOF HEADLINING ASSEMBLY
(a) Insert the roof headlining assembly into the vehicle from the door.
NOTICE:
Check that the corners of the roof headlining assembly are not
folded, twisted or otherwise deformed and that none of the ...
Sending Malfunction (Navigation to APGS) (U0073,U0100,U0140,U0155)
DESCRIPTION
These DTCs are stored when a malfunction occurs in the CAN communication circuit.
DTC No.
DTC Detection Condition
Trouble Area
U0073
CAN bus connection error
CAN communication system
U0100
...
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the navigation system.
*: Use the Techstream.
PROCEDURE
1.
VEHICLE BROUGHT TO WORKSHOP
NEXT
2 ...