Toyota Tacoma manuals

Toyota Tacoma (2015-2018) Service Manual: Precaution

PRECAUTION

HINT:

  • Any digits beyond the 0.01 mm (1/1000 in.) place for standard, minimum and maximum values should be used as a reference only.
  • When both standard and maximum or minimum values are listed for an inspection, use the standard value as a reference only and base any judgments on the maximum and minimum values.
Engine Unit
...

Installation
INSTALLATION PROCEDURE 1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR 2. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY 3. INSTALL IGNITION COIL ASSEMBLY 4. INSTALL FUEL INJECTOR SEAL 5. ...

Other materials:

Front Differential Oil Temperature Sensor Circuit Low (P17C7)
DESCRIPTION This DTC is output when a short to ground in the oil temperature sensor is detected. DTC No. Detection Item DTC Detection Condition Trouble Area P17C7 Front Differential Oil Temperature Sensor Circuit Low ...

Crawl Indicator Light does not Come ON
DESCRIPTION Refer to Crawl Indicator Light Remains ON (See page ). WIRING DIAGRAM Refer to Crawl Indicator Light Remains ON (See page ). CAUTION / NOTICE / HINT NOTICE: When replacing the skid control ECU (master cylinder solenoid), perform calibration (See page ). Ins ...

Front Axle Hub Bolt
Installation INSTALLATION PROCEDURE 1. INSTALL FRONT AXLE HUB BOLT (a) Install a new hub bolt through the axle hub. (b) Install the washer plate, as shown in the illustration, through the hub bolt, and install the hub bolt by tightening the hub nut. 2. INSTALL FRONT DISC 3. INSTALL FRON ...

В© 2011-2025 Copyright www.ttguide.net