Toyota Tacoma manuals

Toyota Tacoma (2015-2018) Service Manual: Engine Unit

On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT ENGINE COOLANT (See page ) 2. INSPECT ENGINE OIL (See page ) 3. INSPECT BATTERY (See page ) 4. INSPECT SPARK PLUG (See page ) 5. INSPECT AIR CL ...

Precaution
PRECAUTION HINT: Any digits beyond the 0.01 mm (1/1000 in.) place for standard, minimum and maximum values should be used as a reference only. When both standard and maximum or minim ...

Other materials:

Steering Angle Sensor (C1A47)
DESCRIPTION The forward recognition camera receives steering angle information from the spiral cable with sensor sub-assembly. If the forward recognition camera detects a spiral cable with sensor sub-assembly, DTC C1A47 is stored. DTC No. Detection Item DTC Det ...

Installation
INSTALLATION PROCEDURE 1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR 2. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY 3. INSTALL IGNITION COIL ASSEMBLY 4. INSTALL FUEL INJECTOR SEAL 5. INSTALL FUEL INJECTOR ASSEMBLY 6. INSTALL FUEL DELIVERY PIPE RH 7. INSTALL FUEL DELIVERY PIP ...

Data List / Active Test
DATA LIST / ACTIVE TEST 1. READ DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or sig ...

В© 2011-2024 Copyright www.ttguide.net