Toyota Tacoma (2015-2018) Service Manual: Installation

Toyota Tacoma (2015-2018) Service Manual / Lighting / Hazard Warning Switch / Installation

INSTALLATION

PROCEDURE

1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY (AIR CONDITIONING CONTROL ASSEMBLY) (for Automatic Air Conditioning System)

(a) Connect the connectors.

(b) Engage the 8 clips to hazard warning signal switch assembly (air conditioning control assembly).

2. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY (AIR CONDITIONING CONTROL ASSEMBLY) (for Manual Air Conditioning System)

(a) Connect the connectors.

(b) Engage the 8 clips to hazard warning signal switch assembly (air conditioning control assembly).

3. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)

4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System)

5. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

6. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY

7. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY

8. INSTALL COWL SIDE TRIM BOARD LH

9. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab)

10. INSTALL FRONT DOOR SCUFF PLATE LH (for Access Cab)

Headlight Assembly

Inspection

INSPECTION PROCEDURE 1. INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY (AIR CONDITIONING CONTROL ASSEMBLY) (a) Check the resistance. (1) Measure the resistance according to the value(s) ...

Other materials:

Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE STARTER YOKE ASSEMBLY (a) Remove the nut and disconnect the lead wire from terminal C. (b) Remove the 2 bolts. (c) Pull out the starter yoke assembly and commutator end frame together with the starter armatur ...

Diagnosis System
DIAGNOSIS SYSTEM 1. DESCRIPTION The 4 wheel drive control ECU records DTCs when the ECU detects a malfunction in the ECU itself or in system circuits. The DTCs can be read through the DLC3 of the vehicle. When the system seems to be malfunctioning, use the Techstream to check for malfunctions ...

Four-wheel drive system
Use the front-wheel drive control switch to select the following transfer modes. H2 (high speed position, two-wheel drive) Use this for normal driving on dry hard-surfaced roads. This position gives greater economy, quietest ride and least wear. H4 (high speed position, four-wheel drive) ...