Toyota Tacoma (2015-2018) Service Manual: Inspection

Toyota Tacoma (2015-2018) Service Manual / 2gr-fks Fuel / Fuel Pump / Inspection

INSPECTION

PROCEDURE

1. INSPECT FUEL PUMP

(a) Inspect the resistance of the fuel pump.

(1) Measure the resistance according to the value(s) in the table below.

Text in Illustration

*a	Component without harness connected (Fuel Pump)

Standard Resistance:

Tester Connection	Specified Condition
U - V	0.05 to 3.0 Ω
V - W	0.05 to 3.0 Ω
U - W	0.05 to 3.0 Ω

If the result is not as specified, replace the fuel pump.

Removal

REMOVAL PROCEDURE 1. REMOVE FUEL TANK ASSEMBLY Click here 2. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY Click here 3. REMOVE FUEL PUMP GAUGE RETAINER NOTICE: Before performing these proce ...

Installation

INSTALLATION PROCEDURE 1. INSTALL FUEL SUCTION TUBE SET GASKET (a) Ensure gasket groove is clean and free of foreign particles. (b) Install a new gasket onto the fuel tank. ...

Other materials:

Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART TOUCH SELECT 2-4 AND HIGH-LOW SYSTEM DTC Code Detection Item See page P163B 4WD ECU Malfunction P17A0 Automatic Disconnecting Differential Motor Control Circuit Open ...

Operation Check
OPERATION CHECK 1. CHECK AUTO OPERATION NOTICE: Make sure that initialization has been completed before inspection (See page ). The sliding roof auto operation can be customized. Make sure that the auto operation is ON (See page ). HINT: When pressing the switch for ...

Parts Location
PARTS LOCATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ...