DISASSEMBLY
PROCEDURE
1. REMOVE CONSOLE COMPARTMENT DOOR CUSHION
HINT:
Use the same procedure as for the opposite side.
(a) Disengage the claw to remove the console compartment door cushion. |
|
2. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
(a) Remove the 2 screws. |
|
(b) Disengage the 2 guides to remove the console compartment door lock lever.
(c) Remove the 6 screws. Text in Illustration
|
|
(d) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and 2 guides to remove the console compartment door sub-assembly.
3. REMOVE CONSOLE COMPARTMENT OUTER DOOR
(a) Remove the 4 screws. |
|
(b) Disengage the 2 claws and 2 guides to remove the console compartment outer door.
4. REMOVE CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY
(a) Disengage the 4 claws and 2 guides to remove the console compartment door moulding cover. |
|
(b) Remove the 4 screws. |
|
(c) Disengage the 2 guides to remove the console compartment door hinge sub-assembly.
Seat Belt Buckle Switch LH Circuit Malfunction (B1656/38)
DESCRIPTION
The seat belt buckle switch LH circuit consists of the airbag sensor assembly
and the front seat inner belt assembly LH (seat belt buckle switch LH).
DTC B1655/37 is stored when a malfunction is detected in the seat belt buckle
switch LH circuit.
DTC No.
DTC ...
Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL RADIATOR GRILLE MOULDING
(a) Engage the 8 claws to install the radiator grille moulding.
(b) Install the 8 screws.
2. INSTALL NO. 1 RADIATOR GRILLE GARNISH
(a) for Type A and Type B:
(1) Engag ...
Front Passenger Side Seat Heater does not Operate
DESCRIPTION
When the seat heater switch on the air conditioning control assembly is operated,
the air conditioning amplifier assembly receives the signal. The air conditioning
amplifier assembly receives the signal and operates the front seat heater.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
...