Toyota Tacoma (2015-2018) Service Manual: Components

Starter

...

Disassembly

DISASSEMBLY PROCEDURE 1. REMOVE STARTER YOKE ASSEMBLY (a) Remove the nut and disconnect the lead wire from terminal C. (b) Remove the 2 bolts. ...

Other materials:

Diagnosis System
DIAGNOSIS SYSTEM 1. DESCRIPTION (a) Blind spot monitor data and Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the Techstream to check for malfunctions and to repair it. 2. CHECK DLC3 (a) Check ...

Installation
INSTALLATION PROCEDURE 1. INSTALL COOLER CONDENSER ASSEMBLY (a) Engage the 2 claws to install the 2 condenser upper brackets. (b) Engage the 2 claws to install the 2 condenser lower brackets. (c) Lift the cooler condenser assembly up from the rear side of the vehicle, and install ...

Short in Torque Converter Clutch Solenoid Circuit (Shift Solenoid Valve SL) (P2769,P2770)
DESCRIPTION Shift solenoid valve SL is turned on and off by signals from the ECM to control the hydraulic pressure acting on the lock-up relay valve, which then controls operation of the lock-up clutch. DTC No. DTC Detection Condition Trouble Area ...