DESCRIPTION
This DTC is stored when items controlled by the certification ECU (smart key ECU assembly) cannot be customized via the navigation system vehicle customization screen.
HINT:
The certification ECU (smart key ECU assembly) controls the smart key system related items that are customizable via the audio and visual system vehicle customization screen.
DTC No. |
DTC Detection Condition |
Trouble Area |
---|---|---|
B15F7 |
Certification ECU (smart key ECU assembly) vehicle setting processing malfunction |
|
CAUTION / NOTICE / HINT
NOTICE:
Before replacing the certification ECU (smart key ECU assembly), refer to Registration (See page ).
PROCEDURE
1. |
CHECK CAN COMMUNICATION SYSTEM |
(a) Use the Techstream to check if the CAN communication system is functioning normally (See page ).
OK:
CAN communication DTCs are not output.
NG |
GO TO CAN COMMUNICATION SYSTEM |
|
2. |
CHECK SMART KEY SYSTEM (for Entry Function) |
(a) Check if the smart key system (for Entry Function) is malfunctioning (See page ).
HINT:
Customization may not be possible depending on the malfunction in the smart key system (for Entry Function).
OK:
No malfunctions are present in the smart key system (for Entry Function).
NG |
GO TO SMART KEY SYSTEM (for Entry Function) |
|
3. |
CHECK SMART KEY SYSTEM (for Start Function) |
(a) Check if the smart key system (for Start Function) is malfunctioning (See page ).
HINT:
Customization may not be possible depending on the malfunction in the smart key system (for Start Function).
OK:
No malfunctions are present in the smart key system (for Start Function).
NG |
GO TO SMART KEY SYSTEM (for Start Function) |
|
4. |
CHECK CUSTOMIZE ITEMS |
(a) Make a note of the customizable items for each certification ECU (smart key ECU assembly) related system.
HINT:
The items shown as customizable via the navigation system vehicle customization screen can also be changed manually. In the following step, change the items manually.
(1) Check the customize parameters list for the smart key system (for Entry Function) related items that can be customized via the navigation system vehicle customization screen (See page ).
(2) Check the customize parameters list for the smart key system (for Start Function) related items that can be customized via the navigation system vehicle customization screen (See page ).
(b) Confirm that it is possible to manually change the settings of the customize parameters for each system that are available for customization via the navigation system vehicle customization screen.
OK:
The items available for customization via the navigation system vehicle customization screen can be customized successfully using the manual procedure.
OK |
REPLACE NAVIGATION RECEIVER ASSEMBLY |
NG |
REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) |
Adjustment
ADJUSTMENT
PROCEDURE
1. PREPARE VEHICLE FOR FOG LIGHT AIMING ADJUSTMENT
(a) Prepare the vehicle:
HINT:
Ensure that there is no damage or deformation to the body around the
fog lights.
Fill the fuel tank.
Make sure that the oil is filled to the specified level.
Make sure ...
Data List / Active Test
DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches,
sensors, actuators and other items to be read without removing any parts. This non-intrusive
inspection can be very useful because intermittent conditions or signals ...
TRAC OFF Indicator Light Remains ON
DESCRIPTION
In 2WD mode:
Operation of the VSC OFF switch changes the vehicle between normal mode,
TRAC OFF mode (AUTO LSD mode) and VSC OFF mode. During normal mode, pressing
the VSC OFF switch for a short amount of time changes the vehicle to TRAC
OFF mode (AUTO LSD mode), TR ...