TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Multiplex Communication / Lin Communication System / System Description

Toyota Tacoma (2015-2018) Service Manual: System Description

SYSTEM DESCRIPTION

1. LIN COMMUNICATION SYSTEM DESCRIPTION

The LIN communication system is used for communication between the components in the tables below. If communication cannot be performed through LIN communication because of an open in the communication lines or other reasons, the master control ECU of the relevant system will store a DTC. Refer to the table below about the communication bus lines and connected components.

HINT:

  • Each component has a fail-safe function which activates to maintain the minimum performance of the system and protect the system.
  • In the following table, "â—‹" indicates that the function applies, and "-" indicates that it does not.
Door Bus Lines

Component

Master Control

LIN Communication DTC Output Function

Main Body ECU (Multiplex Network Body ECU)

â—‹

â—‹

Front Power Window Regulator Motor Assembly LH*1

-

-

Front Power Window Regulator Motor Assembly RH*1

-

-

Power Window Regulator Master Switch Assembly*1

-

-

Sliding Roof ECU (Sliding Roof Drive Gear Sub-assembly)*2

-

-
  • *1: w/ Jam Protection Function
  • *2: w/ Sliding Roof
Certification Bus Lines (w/ Smart Key System)

Component

Master Control

LIN Communication DTC Output Function

Certification ECU (Smart Key ECU Assembly)

â—‹

â—‹

Steering Lock ECU (Steering Lock Actuator or Upper Bracket Assembly)

-

-
    Related Tacoma materials

    Rear Seats: Operation and Precautions
    The seatbacks of the rear seats in the Toyota Tacoma can be folded down to provide additional interior flexibility when carrying items. The rear bottom cushions can also be raised, allowing the available space behind the front seats to be configured as needed. Folding down and returning the rear se ...

    Switch Failure (B2342)
    DESCRIPTION This DTC is stored when the sliding roof ECU (sliding roof drive gear sub-assembly) detects that the sliding roof switch is stuck for 30 seconds or more. DTC No. DTC Detection Condition Trouble Area B2342 Sliding roof ECU ( ...

    Installation
    INSTALLATION PROCEDURE 1. INSTALL FRONT CRANKSHAFT OIL SEAL (a) Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing chain cover assembly edge. SST: 09223-22010 SST: 09506-35010 NOTICE: Keep the lip free from foreign matt ...