TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Seat Belt / Seat Belt Warning System / Problem Symptoms Table

Toyota Tacoma (2015-2018) Service Manual: Problem Symptoms Table

PROBLEM SYMPTOMS TABLE

HINT:

  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Seat Belt Warning System

Symptom

Suspected Area

Link

Driver side seat belt warning light does not operate

Refer to the "Driver side seat belt warning light does not operate"

Front passenger side seat belt warning light malfunction

Refer to the "Front passenger side seat belt warning light malfunction"

Seat belt warning light does not operate for driver and front passenger seats

Combination meter assembly

-

Seat belt warning buzzer does not operate

Check customized settings using the Techstream

Combination meter assembly

-
    Related Tacoma materials

    Data List / Active Test
    DATA LIST / ACTIVE TEST 1. DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals ...

    Installation
    INSTALLATION PROCEDURE 1. INSTALL FRONT CONSOLE BOX (for Automatic Transmission) (a) When installing a new front console box: Text in Illustration *a Runner Portion *b Cut Off (1) Usin ...

    On-vehicle Inspection
    ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT CAMSHAFT TIMING GEAR BOLT (a) Remove the camshaft timing oil control solenoid assembly (See page ). (b) Check that the plunger strokes when the plunger in the center of the camshaft timing gear bolt is pressed. Standard stroke: 4 ...