TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Brake Control / Dynamic Control Systems / Vehicle Stability Control System(for Hydraulic Brake Booster) / Multi-terrain Select Indicator Light does not Come ON

Toyota Tacoma (2015-2018) Service Manual: Multi-terrain Select Indicator Light does not Come ON

DESCRIPTION

When the transfer gear position is L4, the multi-terrain select indicator light illuminates and control begins.

Under any of the following conditions, the multi-terrain select system does not begin control and the multi-terrain select indicator light does not illuminate.

  • The vehicle is in the VSC/TRAC OFF state.
  • Crawl Control is operating.
  • There is a malfunction in the VSC system.

WIRING DIAGRAM

Refer to Crawl Indicator Light Remains ON (See page CAUTION / NOTICE / HINT ).

CAUTION / NOTICE / HINT

NOTICE:

  • When replacing the skid control ECU (master cylinder solenoid), perform calibration (See page ). Inspect the fuses for circuits related to this system before performing ).
  • Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE

1.

CHECK CAN COMMUNICATION SYSTEM

NG

GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)

OK

2.

CHECK DTC

B

REPAIR CIRCUITS INDICATED BY OUTPUT DTCS

A

3.

INSPECT SKID CONTROL ECU (PKB TERMINAL)

NG

GO TO STEP 5

OK

4.

REPLACE COMBINATION METER ASSEMBLY

OK

END
NG

REPLACE MASTER CYLINDER SOLENOID

5.

INSPECT DRIVE MONITOR SWITCH

NG

REPLACE DRIVE MONITOR SWITCH

OK

6.

INSPECT ROOF CONSOLE BOX ASSEMBLY

A

REPAIR OR REPLACE HARNESS OR CONNECTOR (MASTER CYLINDER SOLENOID - ROOF CONSOLE BOX ASSEMBLY)
B

REPLACE ROOF CONSOLE BOX ASSEMBLY

C

REPLACE ROOF CONSOLE BOX ASSEMBLY

    Related Tacoma materials

    On-vehicle Inspection
    ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT DRIVE BELT (a) Visually check the belt for defects, such as excessive wear and frayed cords. If any defects are found, replace the drive belt. HINT: Replace the belt if there are any missing ribs. 2. BLEED POWER STEERING SYSTEM (a) Check the fluid ...

    Using the interior lights
    Interior lights list Interior light Personal lights (Access Cab and Double Cab models) ■Illuminated entry system When the interior light switch is in the DOOR position, the interior light automatically turns on/off according to whether the doors are locked/unlocked and whether the ...

    Manual Climate Control: Operation and Settings
    Air conditioning controls Temperature control dial Fan speed control dial "ON/OFF" switch "A/C" switch Outside/recirculated air mode switch Airflow mode control switch Rear window defogger and outside rear view mirror defoggers switch (if equipped) Windshield defogger switch  Adjust ...