TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Vf2cm Transfer / Touch Select 2-4 And High-low System / Invalid Data Received From Vehicle Dynamics Control Module (U0416)

Toyota Tacoma (2015-2018) Service Manual: Invalid Data Received From Vehicle Dynamics Control Module (U0416)

DESCRIPTION

This DTC is detected if a wheel speed malfunction signal is sent from the skid control ECU (brake actuator assembly).

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

U0416

Invalid Data Received From Vehicle Dynamics Control Module
  • Diagnosis Condition: Ignition switch turned to ON (3 seconds elapse after ignition switch is turned to ON)
  • Malfunction Status: Wheel speed sensor malfunction signals from skid control ECU are received
  • Malfunction Time: 0.06 seconds or more (malfunction signal received 1 or more times)
  • Other: 1 trip detection logic
  • CAN communication system
  • Anti-lock brake system (w/o VSC)
  • Vehicle stability control system (w/ VSC)

PROCEDURE

1.

RECONFIRM DTC

(a) Clear the DTCs (See page (b) Check if the same DTCs are output (See page ).

(b) Check if the same DTCs are output (See page Result ).

Result

Result

Proceed to

DTC U0122 and U0416 are output

A

Only DTC U0416 is output

B

DTC is not output

C
A

GO TO DTC U0122

B

CHECK BRAKE CONTROL SYSTEM

C

USE SIMULATION METHOD TO CHECK

    Related Tacoma materials

    Automatic Disconnecting Differential Motor Control Circuit Open (P17A0)
    DESCRIPTION This DTC is output when an open circuit in the A.D.D. shift motor drive circuit is detected. DTC No. Detection Item DTC Detection Condition Trouble Area P17A0 Automatic Disconnecting Differential Motor Control Ci ...

    Lost Communication with Meter (B1324)
    DESCRIPTION This DTC is stored when a communication error occurs between the navigation receiver assembly and combination meter assembly. DTC No. DTC Detection Condition Trouble Area B1324 After the navigation receiver assembly receive ...

    Panoramic View Monitor Settings
    The color of the vehicle icon shown on the panoramic view monitor can be changed to better represent the appearance of the Toyota Tacoma on the display. This adjustment affects only the computer-generated vehicle image and does not change the operation of the camera system.  Changing the body c ...