CAUTION / NOTICE / HINT
Techstream can be used in steps 3, 6, 9 and 12.
PROCEDURE
|
1. |
VEHICLE BROUGHT TO WORKSHOP |
|
.gif)
|
2. |
CUSTOMER PROBLEM ANALYSIS |
|
|
3. |
CHECK AND CLEAR DTCS AND FREEZE FRAME DATA |
|
|
4. |
PROBLEM SYMPTOM CONFIRMATION |
|
|
5. |
CHECK CAN COMMUNICATION SYSTEM |
(a) Check for output DTCs.
HINT:
The ECM of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, be sure to check that there is no trouble in the CAN communication system.
|
Result |
Proceed to |
|---|---|
|
CAN communication system DTC not output |
A |
|
CAN communication system DTC output |
B |
| B | .gif) |
CAN COMMUNICATION SYSTEM |
|
|
6. |
CHECK CLEAR DTCS |
|
|
7. |
PROBLEM SYMPTOM SIMULATION |
|
Result |
Proceed to |
|---|---|
|
Symptom does not occur |
A |
|
Symptom occurs |
B |
| B | |
GO TO STEP 9 |
|
|
8. |
SYMPTOM SIMULATION |
|
|
9. |
CHECK DTCS (OTHER THAN CAN SYSTEM DTCS) |
|
Result |
Proceed to |
|---|---|
|
DTC not output |
A |
|
DTC output |
B |
| B | |
GO TO STEP 11 |
|
|
10. |
PROBLEM SYMPTOMS TABLE |
| NEXT | |
GO TO STEP 12 |
|
11. |
DTC CHART |
|
|
12. |
CIRCUIT INSPECTION |
|
|
13. |
PROBLEM IDENTIFICATION |
|
|
14. |
REPAIR OR REPLACE |
|
|
15. |
CONFIRMATION TEST |
| NEXT | |
END |
