CAUTION / NOTICE / HINT

HINT:

  • Use this procedure to troubleshoot the seat heater system.
  • *: Use the Techstream.

PROCEDURE

1.

VEHICLE BROUGHT TO WORKSHOP

NEXT

2.

CUSTOMER PROBLEM ANALYSIS

(a) Interview the customer to confirm the trouble.

NEXT

3.

INSPECT BATTERY VOLTAGE

(a) Measure the battery voltage.

Standard voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

NEXT

4.

CHECK FOR DTC (AIR CONDITIONING SYSTEM)*

(a) Clear the DTCs.

Click here (b) Check for DTCs.

(b) Check for DTCs.

Click here

Result

Proceed to

DTCs are not output

A

DTCs are output

B

B

GO TO DIAGNOSTIC TROUBLE CODE CHART

A

5.

CHECK FOR DTC (SEAT HEATER SYSTEM)*

(a) Clear the DTCs.

Click here (b) Check for DTCs.

(b) Check for DTCs.

Click here

Result

Proceed to

DTCs are not output

A

DTCs are output

B

B

GO TO DIAGNOSTIC TROUBLE CODE CHART

A

6.

PROBLEM SYMPTOMS TABLE

(a) Refer to Problem Symptoms Table.

Click here

Result

Proceed to

Fault is not listed in Problem Symptoms Table

A

Fault is listed in Problem Symptoms Table

B

B

GO TO STEP 8

A

7.

OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Operation Check

Click here (b) Terminals of ECU

(b) Terminals of ECU

Click here (c) Data List / Active Test

(c) Data List / Active Test

Click here

NEXT

8.

REPAIR OR REPLACE

NEXT

9.

CONFIRMATION TEST

NEXT

END