Toyota Tacoma (2015-2018) Service Manual: Fuel Main Valve

Components

COMPONENTS

ILLUSTRATION

Removal

REMOVAL

PROCEDURE

1. REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

(See page )

2. REMOVE FUEL SENDER GAUGE ASSEMBLY

3. REMOVE NO. 1 FUEL SUB-TANK

4. REMOVE FUEL PUMP FILTER

5. REMOVE FUEL MAIN VALVE ASSEMBLY

(a) Remove the fuel main valve assembly (for High Pressure).

(1) Remove the clip from the fuel filter case.

(2) Using a screwdriver, remove the fuel main valve assembly from the fuel filter case. NOTICE: Do not damage the fuel filter case.

(3) Remove the 2 O-rings from the fuel main valve assembly.

(b) Remove the fuel main valve assembly (for Low Pressure).

(1) Remove the clip from the fuel filter case.

(2) Using a screwdriver, remove the fuel main valve assembly from the fuel filter case. NOTICE: Do not damage the fuel filter case.

(3) Remove the 2 O-rings from the fuel main valve assembly.

Installation

INSTALLATION

PROCEDURE

1. INSTALL FUEL MAIN VALVE ASSEMBLY

(a) Apply gasoline to 2 new O-rings. Then install the 2 O-rings to the fuel main valve assembly (for Low Pressure).

(b) Apply gasoline to 2 new O-rings. Then install the 2 O-rings to the fuel main valve assembly (for High Pressure).

(c) Install the 2 fuel main valve assemblies to the fuel filter case.

(d) Install the 2 clips to the fuel filter case.

2. INSTALL FUEL PUMP FILTER

3. INSTALL NO. 1 FUEL SUB-TANK

4. INSTALL FUEL SENDER GAUGE ASSEMBLY

5. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY