TTGuideTacoma manuals & technical reference
Toyota Tacoma (2015-2018) Service Manual / Air Conditioning / Front Blower Resistor

Toyota Tacoma (2015-2018) Service Manual: Front Blower Resistor

Inspection

INSPECTION

PROCEDURE

1. INSPECT BLOWER RESISTOR

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified

4 (M2) - 2 (HI)

20°C (68°F)

0.369 to 0.451 Ω

3 (M1) - 2 (HI)

1.16 to 1.42 Ω

1 (LO) - 2 (HI)

2.21 to 2.70 Ω

If the result is not as specified, replace the blower resistor.
    Related Tacoma materials

    GPS Mark is not Displayed
    PROCEDURE 1. CHECK CABIN (a) Check the cabin for any object that might interrupt radio reception or additional devices which use radio waves on the instrument panel. If such an object exists, remove it and check if the GPS mark reappears. HINT: The GPS uses ex ...

    Pressure Control Solenoid "B" Actuator Stuck Off (P07757F)
    SYSTEM DESCRIPTION The ECM uses the vehicle speed signal and signals from the transmission revolution sensors (NT, SP2) to detect the actual gear (1st, 2nd, 3rd, 4th, 5th or 6th gear). The ECM compares the actual gear with the shift schedule in the ECM memory to detect mechanical problems of t ...

    Power Supply Drive Circuit (C1257)
    DESCRIPTION The motor relay (semiconductor relay) is built into the hydraulic brake booster and drives the pump motor based on a signal from the skid control ECU (master cylinder solenoid). DTC No. DTC Detecting Condition Trouble Areas C1257 ...